Filter
Top Products
Back to Contents Page
Mini-Card
Dell™Inspiron™9400ServiceManual
1. Follow the procedures in Before Working Inside Your Computer.
2. Turn the computer upside down and loosen the captive screws from the Mini-Card cover.
3. Place your finger under the cover at the indentation, and lift the cover to remove it.
4. If a Mini-Card is not already installed, go to step 5. If you are replacing a Mini-Card, remove the existing card:
a. Disconnect the antenna cables from the Mini-Card.
b. Release the Mini-Card by pushing the metal securing clips toward the back of the computer until the card pops up slightly.
c. Lift the Mini-Card out of its connector.
CAUTION: Before you begin the following procedure, see the safety instructions in the Product Information Guide.
CAUTION: Only products approved for use in your portable computer may be installed.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the
computer.
NOTICE: 2.4-GHz wireless LAN Mini-Cards may be removed and installed by the user.
1
antenna cables (2)
2
Mini-Card
3
Mini-Card connector