Filter
Top Products
Back to Contents Page
Modem
Dell™Inspiron™9400ServiceManual
Removing the Modem
Replacing the Modem
Removing the Modem
1. Follow the instructions in Before Working Inside Your Computer.
2. Turn the computer upside down, loosen the two captive screws on the modem cover, and remove the cover from the computer.
3. Remove the M2 x 3-mm screw that attaches the modem to the system board.
4. Pull up on the pull-tab to disconnect the modem from the connector on the system board.
5. Disconnect the modem cable from the modem.
CAUTION: Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the
computer.
1
system board connector
2
M2 x 3-mm screw
3
pull-tab
4
modem
5
modem cable
NOTICE: Do not disconnect the modem cable from the system board.