Filter
Top Products
5. Install the replacement Mini-Card:
a. Insert the Mini-Card at a 45-degree angle into the connector on the system board, and press the Mini-Card down into the securing clips until the
card clicks into place.
b. Connect the antenna cables to the antenna connectors on the Mini-Card.
6. Replace the Mini-Card cover.
Back to Contents Page
1
metal securing clips (2)
2
Mini-Card
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
NOTICE: To prevent damage to the Mini-Card, never place cables under the card.
NOTE: If you are installing a Mini-Card for the first time, you will find a clear plastic protective sleeve on each antenna cable connector. Before you
connect the antenna cables to the Mini-Card, slide the sleeves off of the cable connectors.