Filter
Top Products
108 Adding and Replacing Parts
Replacing the Hard Drive
NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the
connector.
1
Follow the steps in "Removing the Hard Drive" on page 106 in reverse order.
NOTE: This computer is not equipped with an optical drive—use the Media Base (sold separately) to install
software.
2
Install the operating system for your computer (see "Restoring Your Operating System" on page 98).
3
Install the drivers and utilities for your computer (see "Reinstalling Drivers and Utilities" on page 96).
Memory
You can increase your computer memory by installing memory modules on the system board. See
"Specifications" on page 131 for information on the memory supported by your computer. Install only
memory modules that are intended for your computer.
1 pull-tab 2 hard drive cable 3 hard drive
4 system board connector
1
3
4
2