Filter
Top Products
18 Getting Started
www.dell.com | support.dell.com
6 Align the notches on the bottom of the card with the notches on the connector.
7 Push the memory card firmly into the connector until the latches on either end of the
connector snap into place.
It may require some force to fully seat the card.
8 Make sure each latch fits over the notch on each end of the card.
9 Close the side cover.
10 Close the rear exit.
11 Close the front cover.
12 To update your printer options, follow these instructions:
a For Windows XP, click Start→Control Panel→Printers and Other Hardware→Printers and
Faxes.
For all others, click Start→Settings→Printers.
b Right-click the Dell Laser Printer 1710 icon, and then select Properties.
c On the Install Options tab, increase the amount of memory in the Printer Memory
(MB) box.
d Click OK.