Filter
Top Products
Removing the Wireless Local Area Network (WLAN) Card
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) access panel
3. Disconnect the antennae cables from the WLAN card.
4. Remove the screw that secures the WLAN card to the computer.
5. Remove the WLAN card from its slot on the system board.
Installing the Wireless Local Area Network (WLAN) Card
1. Insert the WLAN card into its connector at a 45–degree angle into its slot.
2. Connect the antenna cables to their respective connectors marked on the WLAN card.
3. Replace and tighten the screw to secure the WLAN card to the computer.
4. Install:
a) access panel
b) battery
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory Module
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) access panel
3. Pry the retention clips away from the memory module until it pops up.
4. Lift up the memory module and remove it from the computer.
Installing the Memory Module
1. Insert the memory into the memory socket.
2. Press the clips to secure the memory module to the system board.
22