Filter
Top Products
d) palmrest
e) thermal module
f) right base panel
g) hard drive
h) optical drive
i) keyboard
j) keyboard trim
k) access panel
l) battery
m) SD memory card
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) SD memory card
b) ExpressCard
c) battery
d) access panel
e) keyboard trim
f) optical drive
g) hard drive
h) WLAN card
i) right base panel
j) thermal module
k) palmrest
l) ExpressCard reader cage
m) display assembly
n) left support frame
o) system board
3. Disconnect the coin-cell battery from the system board.
4. Pry the coin-cell battery from the adhesive and remove it.
Installing the Coin-Cell Battery
1. Place the coin-cell battery on the system board with adhesive side downwards.
2. Connect the coin-cell battery cable to the system board.
3. Install:
a) system board
b) left support frame
c) display assembly
d) ExpressCard reader cage
40