Filter
Top Products
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Recommended Tools
The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Removing the SD Memory Card
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Press in on the SD memory card to release it from the computer.
3. Slide the SD memory card out of the computer.
Installing the SD Memory Card
1. Push the memory card into the compartment until it clicks into place.
2. Follow the procedures in
After Working Inside Your Computer
.
Removing the ExpressCard
1. Follow the procedures in
Before Working On Your Computer
.
2. Push in on the ExpressCard.
3. Slide the ExpressCard out of the computer.
Installing the ExpressCard
1. Insert the express card into the slot and press till it clicks into place. .
2. Follow the procedures in
After Working Inside Your Computer
.
Removing the Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Slide the battery release latches into the unlock position.
7