Filter
Top Products
e) LED board flat flex cable
3. Tighten the screws on the palmrest.
4. Tighten the screws at the bottom of the computer.
5. Install:
a) right base panel
b) optical drive
c) keyboard
d) keyboard trim
e) access panel
f) battery
g) SD memory card
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the ExpressCard Reader Cage
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) SD memory card
b) battery
c) access panel
d) keyboard trim
e) keyboard
f) optical drive
g) right base panel
h) palmrest
3. Remove the screws that secure the ExpressCard reader cage in place.
4. Remove the ExpressCard reader cage from the computer.
Installing the ExpressCard Reader Cage
1. Align the ExpressCard reader cage to its original position in the computer and snap it into place.
2. Install the screws that secure the ExpressCard reader cage.
3. Install:
a) palmrest
b) right base panel
c) optical drive
d) keyboard
e) keyboard trim
f) access panel
g) battery
28