Filter
Top Products
6. Disconnect the media button flat flex cable.
7. Disconnect the touch pad flat flex cable.
8. Disconnect the fingerprint scanner flat flex cable.
9. Disconnect the power button flat flex cable.
10. Lift up the right edge of palmrest assembly.
11. Release the tabs on the left edge of the palm rest assembly and remove the palmrest from the computer.
Installing the Palmrest
1. Align the palm rest assembly to its original position in the computer and snap it into place.
2. Connect the following cables to the system board:
a) power button flat flex cable.
b) fingerprint scanner flat flex cable
c) touch pad flat flex cable
d) media button flat flex cable
27