Filter
Top Products
Removing the Camera
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. display bezel
3. Perform the following steps:
a. Remove the screw that secures the camera and microphone module.
b. Disconnect the camera cable.
c. Lift and remove the camera and microphone module.
Installing the Camera
1. Place the camera and microphone module on its place.
2. Connect the camera cable.
3. Tighten the screw to secure the camera and microphone module.
4. Install:
a. display bezel
b. battery
5. Follow the procedures in After Working Inside Your Computer.
Removing the Keyboard Trim
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Perform the following steps:
a. Remove the screw that secures the keyboard trim at the back of the computer.
b. Pry up the keyboard trim on its sides and the top edge.
c. Lift upwards and remove the keyboard trim from the computer.
13