Filter
Top Products
Installing the Keyboard
1. Connect the keyboard cable to the keyboard.
2. Place the keyboard into its place until all the metal tabs fit into their positions.
3. Press down on the keyboard to the left and right side ensuring that all the snaps are fully engaged
with the computer.
4. Install the screws to secure the keyboard to the palmrest.
5. Install the screws at the back of the computer.
6. Install:
a. keyboard trim
b. battery
7. Follow the procedures in After Working Inside Your Computer.
Removing the Base Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Perform the following steps:
a. Remove the screws that secure the base cover.
b. Pry the base cover towards the front of the computer and remove it from the computer.
15