Filter
Top Products
Installing the Keyboard Trim
1. Align the keyboard trim to its place.
2. Press along the sides of the keyboard trim until it snaps in place.
3. Tighten the screw at the back of the computer to secure the keyboard trim.
4. Install the battery.
5. Follow the procedures in After Working Inside Your Computer.
Removing the Keyboard
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. keyboard trim
3. Perform the following steps:
a. Remove the screws at the back of the computer and flip the computer over.
b. Remove the screws that secure the keyboard to the computer.
4. Perform the following steps:
a. Slide the keyboard and flip the keyboard over [1] and [2]
b. Disconnect the keyboard cable [1] and [2] and lift the keyboard to remove from the computer [3].
14