Filter
Top Products
NOTE: You may need a sharp tool to pry the base cover.
Installing the Base Cover
1. Insert the base cover into its slot until it clicks into place.
2. Tighten the screws to secure the base cover to the computer.
3. Install the battery.
4. Follow the procedures in After Working Inside Your Computer.
Removing the Memory Module
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base cover
3. Pry the retention clips away from the memory module until it pops up.
4. Lift up the memory module and remove it from the computer.
Installing the Memory Module
1. Insert the memory into the memory socket.
2. Press the clips to secure the memory module to the system board.
16