Filter
Top Products
h. hard drive
i. hard-drive cage
j. WLAN card
k. display hinge
l. palmrest
m. system fan
n. ExpressCard cage
o. system board
p. speakers
3. Perform the following steps:
a. Remove the screw that secures the LED cover.
b. Un-route the status-light board cable from its channels.
c. Remove the screw that secures the status-light board and lift to remove the status-light board
from the computer.
Installing the Status-Light Board
1. Place the status-light board on its place on the computer.
2. Connect the status-light board cable to its connector.
3. Tighten the screw to secure the status-light board on the computer.
4. Place the LED cover on the status-light board.
35