Filter
Top Products
1-4 Dell PowerEdge Cluster F-Series SAN Guide
Figure 1-3. Cluster Consolidation Configuration
See “Cluster Consolidation Configurations,” found later in this document, for more
information about supported configurations and installation procedures.
PowerVault SAN Components
Dell PowerVault SAN products supported in cluster configurations include the follow-
ing components:
•
PowerVault 650F, 651F, and 630F — Fibre Channel storage systems
•
PowerVault 50F, 51F, and 56F — Fibre Channel switches
•
QLogic QLA-2100/33 — Fibre Channel host bus adapters (HBAs) (copper only)
•
QLogic QLA-2200/33 or 2200/66— Fibre Channel HBAs (copper only)
•
PowerVault 35F — Fibre Channel-to-small computer system interface (SCSI)
bridge
•
PowerVault 130T — Digital Linear Tape (DLT) library
•
PowerVault 120T — DLT autoloader
NOTE: Not all of the products in the preceding list are supported in all SAN-attached
cluster configurations. See the section in this guide for your specific configuration and
its corresponding supported components.
See the Dell PowerVault SAN documentation and the appropriate SAN component
documentation for configuration information.
PowerEdge
Cluster pair
Fibre Channel
switch
PowerVault
storage system
Fibre Channel
switch
Fibre Channel
connections
cluster
interconnect
cluster
interconnect
PowerEdge
Cluster pair
Public LAN