Filter
Top Products
1-28 Dell PowerEdge Cluster F-Series SAN Guide
Example 2: A configuration with two clusters attached to a single PowerVault storage
system would have two zones as shown in Figure 1-13.
Figure 1-13. Example Showing Two Zones
Example Configurations
This section provides examples of supported configurations for SAN-attached cluster
consolidation configurations.
Figure 1-14 shows an example of a configuration with five MSCS clusters sharing one
PowerVault 65
x
F storage system and a pair of PowerVault 56F 16-port Fibre Channel
switches. Figure 1-15 provides an example of a maximum configuration with one
PowerVault 65
x
F storage system. Figure 1-16 shows a combination of different groups
of MSCS clusters using different PowerVault 65
x
F storage systems.
PowerVault
Fibre Channel
storage
PowerVault
tape library
up to 11
disk array
enclosures
PowerEdge cluster
PowerEdge cluster
cluster
interconnect
PowerVault
51F Fibre
Channel
switch 2
PowerVault
51F Fibre
Channel
switch 1
Zone 1
Zone 2
PowerVault3
5F Fibre
Channel
bridge