Filter
Top Products
Removing and Replacing Parts 25
Keyboard Connector
8 Disconnect the keyboard flex cable from the interface connector on the
system board assembly by pulling up on the connector.
NOTICE: Do not pull on the keyboard flex cable.
9 Remove the keyboard assembly from the bottom case assembly.
Replacing the Keyboard Assembly
1 Place the keyboard on the palmrest at the front of the computer with
the keys face down and the connector toward the back of the
computer.
NOTICE: To avoid damage to the connector pins, press the keyboard
connector evenly into the interface connector, and do not reverse the keyboard
connector.
2
Connect the keyboard flex cable to the interface connector on the
system board assembly.
3 Carefully turn the keyboard over and fit the keyboard into place.
keyboard flex cable
track stick cable