Filter
Top Products
32 Removing and Replacing Parts
www.dell.com | support.dell.com
Removing the Display-Feed Flex Cable (14.1-Inch Display Panel)
Display-Feed Flex Cable
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1
Remove the hard drive.
2 Remove the display assembly.
3 Remove the display assembly bezel.
4 Remove the tape that covers the display panel connector.
5 Pull the top flex cable connector down and away to remove it from the
display panel connector.
display panel connector
top flex cable connector
pull tab
bottom flex
cable connector
inverter
connector