Filter
Top Products
Removing and Replacing Parts 27
Display Assembly
1
Remove the hard drive.
2 Remove the center control cover.
a Use a scribe to lift the right edge of the center control cover and
pry it loose from the bottom case assembly.
b Lift the center control cover up and away from the bottom case
assembly.
3 Close the display.
M2.5 x 5-mm
screws (5)
LCD flex cable connector
bottom case assembly
center control cover
EMI shield bracket
display-assembly top cover
(14.1-inch display assembly shown
)
M2 x 3-mm screws (2)