Dell M2400 Network Card User Manual


 
22 Specifications
Secure Digital (SD) Memory Card Reader
Cards supported SD, SDIO, SD HC, Mini SD (with adapter)
MMC, MMC+, Mini MMC (with adapter)
Memory
Memory module connector two DIMM slots
Memory configurations available 1 GB (one 1 GB DIMM or two 512 MB
DIMMs)
2 GB (two DIMMs)
4 GB (two DIMMs)
8 GB (two DIMMS, requires 64-bit
Windows XP or Windows Vista operating
system)
Memory type DDR2 800 MHz (if supported by chipset
and/or processor combinations). Non-ECC
memory only.
Minimum memory 1 GB
Maximum memory 8 GB (requires 64-bit Windows XP or
Windows Vista operating system)
NOTE: In order to take advantage of the dual-channel bandwidth capability, both
memory slots must be populated and must match in size.
NOTE: The available memory displayed does not reflect the complete maximum
memory installed because some memory is reserved for system files.
NOTE: To enable Intel
®
Active Management Technology (iAMT), you must have a
DIMM in the memory connector labeled "A". For more information about the memory
connector, see your computer’s Service Manual at support.dell.com. For more
information about iAMT, see the Dell™ Systems Management Administrator's Guide at
support.dell.com.
Ports and Connectors
Audio microphone connector, stereo
headphone/speakers connector
IEEE 1394a 4-pin connector
book.book Page 22 Tuesday, July 22, 2008 10:56 AM