Dell MD3200 Computer Accessories User Manual


 
120 Configuration: Disk Groups and Virtual Disks
1
In the AMW, select the
Mappings
tab.
2
In the
Topology
pane, select:
•Default Group
Undefined mappings node
Individual defined mapping
Host group
•Host
3
In the toolbar, select
Mappings
Define
Additional Mapping
.
The
Define Additional Mapping
window is displayed.
4
In
Host group or host
, select the appropriate host group or host.
All defined hosts, host groups, and the default group are displayed in the
list.
NOTE: When configuring an iSCSI storage array, including the MD3200 or
MD3220, if a host or a host group is selected that does not have a SAS host
bus adapter (SAS HBA) host port defined, a warning dialog is displayed.
5
In
Logical unit number
, select a LUN. The supported LUNs are 0 through
255.
6
Select the virtual disk to be mapped in the
Virtual Disk
area.
The
Virtual Disk
area lists the names and capacity of the virtual disks that
are available for mapping based on the selected host group or selected
host.
7
Click
Add
.
NOTE: The Add button is inactive until a host group or host, LUN, and virtual
disk are selected.
8
To define additional mappings, repeat step 4 through step 7.
NOTE: After a virtual disk is mapped, it is no longer available in the Virtual
Disk area.
9
Click
Close
.
The mappings are saved. The
Topology
pane and the
Defined Mappings
pane in the
Mappings
tab are updated to reflect the mappings.
book.book Page 120 Tuesday, September 27, 2011 3:25 PM