Filter
Top Products
31 | Initial Setup
3. The SonicWALL Setup Wizard launches and guides you
through the configuration and setup of your Dell
SonicWALL NSA E6500.
The Setup Wizard launches upon initial loading of the
NSA E6500 management interface.
4. Follow the on-screen prompts to complete the Setup
Wizard.
Depending on the changes made during your setup
configuration, the appliance may restart.
Accessing the Setup Wizard
If you cannot connect to the Dell SonicWALL NSA E6500 or the
Setup Wizard does not display, verify the following
configurations:
• Did you correctly enter the Dell SonicWALL NSA E6500
management IP address in your Web browser?
• Are the Local Area Connection settings on your computer set
to use DHCP or set to a static IP address on the
192.168.168.x/24 subnet?
• Do you have the Ethernet cable connected to your computer
and to the X0 (LAN) port on your appliance?
• Is the connector clip on your network cable properly seated in
the port of the security appliance?
• Some browsers may not launch the Setup Wizard
automatically. In this case:
• Log into the NSA E6500 using “admin” as the user name
and “password” as the password.
• Click the Wizards button on the System > Status page.
• Select Setup Wizard and click Next to launch the Setup
Wizard.
• Some pop-up blockers may prevent the launch of the
Setup Wizard. You can temporarily disable your pop-up
blocker, or add the management IP address of your
SonicWALL appliance (192.168.168.168 by default) to
your pop-up blocker's allow list.