Filter
Top Products
65
Using Support Tools
NOTE: If you wait too long and the
operating system logo appears, continue
to wait until you see the Microsoft
Windows desktop; then, shut down your
computer and try again.
3. Select Diagnostics from the boot menu
and press <Enter>.
During the assessment, answer any questions
that appear.
•If a failure is detected, the computer
stops and beeps. To stop the assessment
and restart the computer, press <n>; to
continue to the next test, press <y>; to
retest the component that failed, press <r>.
•If failures are detected during the
Enhanced Pre-boot System Assessment,
write down the error code(s) and contact
Dell (for more information, see “Contacting
Dell” on page82).
If the Enhanced Pre-boot System Assessment
completes successfully, the following
message appears “Do you want to run
the remaining memory tests? This
will take about 30 minutes or
more. Do you want to continue?
(Recommended).”
If you are experiencing memory issues,
press<y>, otherwise press <n>. The following
message is displayed: “Enhanced Pre-boot
System Assessment Complete”.
Click <Exit> to reboot your computer.