Filter
Top Products
Removing the System Fan
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. bottom cover
3. Perform the following steps to remove the system fan:
a. Remove the system fan connector cable from the system board. [1]
b. Remove the screws that secure the system fan to the computer. [2]
c. Lift and remove the system fan from the computer. [3]
Figure 11.
Installing the System Fan
1. Align the system fan in its position in the chassis.
2. Install the screws that secure the system fan to the computer.
3. Connect the system fan connector cable to the system board connector.
4. Install:
a. bottom cover
b. battery
5. Follow the procedures in After Working Inside Your Computer.
Removing the Global Positioning System (GPS) Module
1. Follow the procedures in Before Working Inside your computer.
2. Remove:
a. battery
b. bottom cover
24