Filter
Top Products
9. Follow the procedures in After Working Inside Your Computer.
Removing the Smart Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. hard drive
c. keyboard
d. bottom cover
e. docking board
f. optical drive
g. memory module
h. GPU module
i. heatsink
j. ExpressCard
k. GPS module
l. WLAN card
m. WWAN card
n. SIM board
o. system board
3. Perform the following steps:
a. Disconnect the smart card ribbon cable from the USH board. [1,2]
b. Remove the screws that secure the smart card module to the computer. [3]
c. Lift and remove the smart card module from the computer. [4]
Figure 23.
Installing the Smart Card
1. Align the smart card module along its position on the computer.
2. Install the screws that secure the smart card module to the computer.
3. Connect the smart card ribbon cable to the USH board.
36