Filter
Top Products
Removing the Power Connector
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. hard drive
c. keyboard
d. bottom cover
e. docking board
f. optical drive
g. memory module
h. GPU module
i. heatsink
j. ExpressCard
k. GPS module
l. WLAN card
m. WWAN card
n. SIM board
o. system board
3. Perform the following steps to remove the power connector:
a. Pry up the power connector and remove it from the computer.
Figure 30.
Installing the Power Connector
1. Place the power connector in its position on the chassis, aligning the guides on the connector sides
with the base.
2. Press down firmly to secure the power connector to the chassis.
46