Filter
Top Products
3. Perform the following steps:
a. Unroute the display cables and antennas from the routing channels. [1]
b. Disconnect the antennas from the modules.
c. Remove the screws that secure the display connector cable cover to the system board. [2][3]
d. Disconnect the display connector cable from the system board. [4]
Figure 31.
4. Perform the following steps:
a. Remove the screws indicated to remove the hinge covers. [1]
b. Lift the hinge covers and remove them to expose the display cable routing and the display hinges
underneath. [2]
c. Lift the cables to expose the display hinge screws. [3]
Figure 32.
48