Filter
Top Products
134 Adding and Replacing Parts
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
1
Follow the procedures in "Before You Begin" on page 117.
2
Remove the battery. See "Replacing the Battery" on page 47.
3
Loosen the captive screw and remove the card cover from the computer.
4
Pull the card out of the compartment so that you can disconnect the card from its cable and remove it
from the computer.
5
To replace the card, connect the card to the cable and then carefully insert it into the compartment.
6
Replace the card cover and tighten the screw.
7
Replace the battery.
1 cable connector 2 card 3 card cover
3
2
1
PD598a01.book Page 134 Monday, February 6, 2006 2:24 PM