Filter
Top Products
Using Cards 75
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
To install a media memory card:
1
Hold the card with the top side of the card facing up.
2
Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and try again.
The computer recognizes the media memory card and automatically loads the appropriate device driver.
If the configuration program tells you to load the manufacturer's drivers, use the CD that came with the
media memory card, if applicable.
Removing a Media Memory Card
NOTICE: Use the media memory card configuration utility (click the icon in the taskbar) to select a card and
stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration
utility, you could lose data.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
Press the card in to release and remove the card.
1 5-in-1 media memory card
slot
2 media memory card
1
2
PD598a01.book Page 75 Monday, February 6, 2006 2:24 PM