Filter
Top Products
100 Adding and Replacing Parts
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before
you begin working inside the computer.
1
Follow the procedures in "Before You Begin" on page 89.
2
Open the display.
3
Remove the hinge cover. See "Hinge Cover" on page 98.
4
Remove the keyboard:
a
Remove the two screws at the top of the keyboard.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful
when removing and handling the keyboard.
b
Slightly slide the keyboard toward the back of the computer, and then lift the keyboard only
enough to hold it up and slightly forward to allow access to the keyboard connector.
c
To release the keyboard cable from the keyboard connector on the system board, rotate the plastic
bar on the keyboard connector to the front of the computer.
1 screws (2) 2 keyboard cable 3 plastic bar on keyboard connector
4 tabs 5 keyboard
1
3
5
2
4
book.book Page 100 Friday, December 21, 2007 3:22 PM