Filter
Top Products
66 Using Multimedia
1
Inspect the media card to determine the proper orientation for insertion.
2
Slide the media card into the appropriate slot of the media card reader
until it is completely seated in the connector.
3 If you encounter resistance, remove the card, check for proper
orientation, and then try again.
Instructions for Setting Up a Device With Bluetooth Wireless
Technology
1
Turn on the device.
2
Press the connect button on the device.
The Bluetooth LED on the device blinks, indicating that the device is
active and can be detected by the computer.
3
Press the connect button on the front of the media card reader.
4
The Bluetooth LED on the device stops blinking and stays on for a few
moments indicating that the connection between the device and the
computer has been established. The LED then turns off.
book.book Page 66 Friday, April 25, 2008 3:58 PM