Filter
Top Products
System Setup 81
Power
ACPI Suspend
Type
Specifies the ACPI suspend type. The default is S3.
AC Recovery Specifies the behaviour of the system after recovering from a
power loss.
• On — The computer turns on after it recovers from a power
failure.
• Off — The computer remains powered off.
• Last — The computer returns the power state it was in
before the power failure.
Remote Wake Up This option turns on the computer when a user tries to access
the computer through the LAN.
Wake-Up By
Ring
This option turns on the computer when an incoming call is
detected on the modem.
Auto Power On Enables you to set an alarm to turn on the computer
automatically.
Boot
Removable
Device
Priority
Sets the boot priority among the attached removable devices.
Hard Disk Boot
Priority
Sets the hard drive boot priority. The items displayed are
dynamically updated according to the hard drives detected.
1st Boot Device
through 3rd Boot
Device
Sets the boot device sequence. Only the bootable devices that
are connected to the computer are listed as options.
Boot Other
Device
This option enables you to boot from other devices such as a
memory key.
Exit
Exit Options Provides options to Exit Saving Changes, Exit Discarding
Changes, Load Setup Default, and Discard Changes.
book.book Page 81 Friday, April 25, 2008 3:58 PM