Filter
Top Products
Error Code Message Information
HWC1009
Message The backplane is absent.
LCD Message The backplane is absent. Check hardware.
Details The backplane may be necessary for proper operation. System functionality may be
degraded.
Action If removal was unintended, check presence, then reinstall or reconnect.
HWC1010
Message The backplane is disabled.
Action If disabled unexpectedly, re-enable backplane.
HWC1015
Message The mezzanine card <
number
> is absent.
Details The mezzanine card may be necessary for proper operation. System functionality may be
degraded.
Action If removal was unintended, check presence, then reinstall or reconnect.
HWC2006
Message The <
name
> is not installed correctly.
LCD Message The <
name
> is not installed correctly. Check connection.
Details The device may be necessary for proper operation. System functionality may be
degraded.
Action Check presence, then re-install or reconnect.
HWC2008
Message A fabric mismatch detected between IOM and mezzanine card <
number
>.
Details The fabric type for the IOM and mezzanine cards must match.
Action Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
HWC2011
Message The riser board cable or interconnect is not connected, or is improperly connected.
LCD Message Riser board cable or interconnect failure. Check connection.
Details The riser blade cable may be necessary for proper operation. System functionality may
be degraded.
Action Check the riser board or interconnect presence, then reinstall or reconnect.
HWC3000
Message The <
name
> is removed.
Details The removed device may be necessary for proper operation. System functionality may be
degraded.
Action If removal was unintended, check presence of the removed device, then reinstall or
reconnect
HWC3002
Message Server <
number
> is removed.
78