Dell R710 Computer Hardware User Manual


  Open as PDF
of 58
 
Dell™ PowerEdge™ R710 Technical Guidebook
31
B. Supported ACPI States
Advanced Configuration and Power Interface – A standard interface for enabling the operating system
to direct configuration and power management.
TheNehalemprocessorsupportsthefollowingC-States:C0,C1,C1E,C3,andC6.R710willsupportallof
the available C-States.
ThePowerEdgeR710willsupporttheavailableP-StatesassupportedbythespecicNehalemprocessors:
PROC
NUMBER
QDF # FREQUENCY
STANDARD
TDP
LFM TDP P-STATE NOTES
1.60 Pmin+0
1.73 Pmin+1
E5502
Q1G8 1.86 80 75 Pmin+2 D-0
E5504
Q1GM 2.00 80 75 Pmin+3 D-0
L5506
Q1HG 2.13 60 52 Pmin+4 D-0
E5506
Q1GL 2.13 80 75 Pmin+4 D-0
L5520
Q1GN 2.26 60 52 Pmin+5 D-0
E5520
Q1GR 2.26 80 75 Pmin+5 D-0
E5530
Q1GK 2.40 80 75 Pmin+6 D-0
SECTION 9. BIOS
A. Overview / Description
The PowerEdge R710 BIOS is based on the Dell BIOS core, and supports the following features:
•Nehalem-EP2SSupport
•SimultaneousMulti-Threading(SMT)support
•CPUTurboModesupport
•PCI2.3compliant
•Plugn’Play1.0acompliant
•MP(Multiprocessor)1.4compliant
•Bootfromharddrive,opticaldrive,iSCSIdrive,USBkey,andSDcard
•ACPIsupport
•DirectMediaInterface(DMI)support
•PXEandWOLsupportforon-boardNICs
•Memorymirroringandsparebanksupport
•SETUPaccessthrough<F2>keyatendofPOST
•USB2.0(USBbootcodeis1.1compliant)
•F1/F2errorlogginginCMOS
•VirtualKVM,CD,andoppysupport
•UniedServerCongurator(UEFI2.1)support
•PowermanagementsupportincludingDBS,powerinventoryandmultiplepowerproles
The PowerEdge R710 BIOS does not support the following:
•EmbeddedDiagnostics(embeddedinMASER)
•BIOSlanguagelocalization
•BIOSrecoveryafterbadash(butcanberecoveredfromiDRAC6Express)
 previous next