Filter
Top Products
Dell™ PowerEdge™ R710 Technical Guidebook
38
CONFIG
TYPE
CONFIGS DESCRIPTION
NON-MIXED
DRIVES, ALL
SATA OR
ALL SAS
MIXED SAS/ SATA
MIN 2
x
SAS+1
x
SATA
xSAS + 6xSATA
xSAS + 6xSATA
MIN
HDD
MAX
HDD
MIN
HDD
MAX
HDD
SAS/SATA
(No RAID)
0 MSS
Integrated
SAS/SATA No RAID
(SAS 6/iR)
2.5"=1
3.5"=1
2.5"=8
3.5"=8
SAS/SATA
(RAID)
1 MSSR0
Integrated
SAS/SATA RAID 0
(SAS 6/iR, PERC6/I)
2.5"=1*
3.5"=1*
2.5"=8
3.5"=8
N/A
2 MSSR1
Integrated
SAS/SATA RAID 1
(SAS 6/iR, PERC6/I)
2.5"=2
3.5"=2
2.5"=2
3.5"=2
N/A
3 MSSR5
Integrated
SAS/SATA RAID 5
(PERC 6/i)
2.5"=3
3.5"=3
2.5"=8
3.5"=8
N/A
4 MSSR6
Integrated
SAS/SATA RAID 6
(PERC 6/i)
2.5"=4
3.5"=4
2.5"=8
3.5"=8
N/A
5 MSSR10
Integrated
SAS/SATA RAID 10
(PERC 6/i)
2.5"=4
3.5"=4
2.5"=8
3.5"=8
6 MSSR1R1
Integrated
SAS/SATA RAID
1/RAID 1
(SAS 6/iR, PERC 6/i)
2.5"=2+2
3.5"=2+2
2.5"=2+2
3.5"=2+2
7 MSSR1R5
Integrated
SAS/
SATA RAID
1/RAID 5 (PERC 6/i)
2.5
"
=2+3
3.5
"
=2+3
2.5"=2+6
3.5"=2+6
SAS/SATA
(No RAID)
8 MSS-X
Integrated
SAS/SATA No RAID
(SAS 6/iR)
2.5"=3
3.5"=3
2.5"=6
3.5"=6
IV. Diskless Configuration Support
The system supports diskless configuration with no storage controller (SAS 6/iR or PERC 6i) installed in
the system. A 2.5" HDD backplane is still installed in this configuration.
V. Hard Drive LED Indicators
Each disk drive carrier has two LED indicators visible from the front of the system. One is a green LED
for disk activity and the other is a bicolor (green/amber) LED for status information. The activity LED is
driven by the disk drive during normal operation. The bicolor LED is controlled by the SEP device on the
backplane. Both LEDs are used to indicate certain conditions under direction of a storage controller.
C. RAID Configurations
PowerEdge R710 Factory Configuration Summary