Dell R710 Computer Hardware User Manual


  Open as PDF
of 58
 
Dell™ PowerEdge™ R710 Technical Guidebook
42
RESOLUTION REFRESH RATE (Hz) COLOR DEPTH (BIT)
640 x 480 60, 72, 75, and 85 8, 16, and 32
800 x 600 56, 60, 72, 75, and 85 8, 16, and 32
1024 x 768 60, 72, 75, and 85 8, 16, and 32
1152 x 864 75 8, 16, and 32
1280 1024 60, 75, and 85 8 and 16
1280 1024 60 32
CHASSIS CONFIG TAPE BACKUP UNIT (INTERNAL)
Backplane Type Config TBU Controller TBU Cable
3.5" x 6" No TBU N/A N/A
3.5" x 4"
No TBU N/A N/A
Internal for 3.5 Bay (RD 1000 Half-Height
SATA)
Connects to MB XR724
DAT72 for 3.5 Bay (Half-Height SCSI) LSI 2032 (SCSI) HBA DR017
No TBU N/A N/A
Internal for 3.5 Bay (RD 1000
Half-Height SATA)
Connects to MB RN694
2.5" x 8 DAT72 for 3.5 Bay (Half-Height SCSI) LSI 2032 (SCSI) HBA CJ176
SECTION 13. VIDEO
A. Overview / Description
The PowerEdge R710 Integrated Dell Remote Access Controller 6 (iDRAC6) incorporates an integrated
videosubsystem,connectedtothe32-bitPCIinterfaceoftheICH9.ThislogicisbasedontheMatrox
G200. The device only supports 2D graphics. The video device outputs are multiplexed between the
front and rear video ports. If a monitor is connected to the front video connector, it will take precedence
over the rear connection, thereby removing the display from the rear connection. The integrated video
core shares its video memory with the iDRAC6’s 128MB DDR2 application space memory. This memory
is also used for the KVM buer.
The PowerEdge R710 system supports the following 2D graphics video modes:
 previous next