Dell R710 Computer Hardware User Manual


  Open as PDF
of 58
 
Dell™ PowerEdge™ R710 Technical Guidebook
43
SECTION 14. AUDIO
A. Overview / Description
Nospeakerssupported
SECTION 15. RACK INFORMATION
A. Overview / Description
Rack installation components such as rails are provided with the PowerEdge R710 Rack Kit. The rack
installation components are as follows: Sliding Rack mount with latest generation Cable Management
Arm (CMA). When the system is installed in a rack, please observe the following guidelines:
Nothingshouldbelocatedwithin12"ofthefrontoftheunitthatwouldrestricttheairowintothesystem.
Nothingshouldbemountedorplacedbehindthechassisthatwouldrestrictairowfromexitingthe
system.OnlyDellapprovedCMAscanbeplacedbehindthechassis.Allotherobjectsshouldbelocated
at least 24" away from the rear of the chassis.
When two systems are placed back to back, the separation between the units should be at least 24" if
the exit airflow is equivalent for the two chassis. This allows the exit air to escape without creating an
extreme back pressure at the rear of one of the chassis.
B. Cable Management Arm (CMA)
Notes:•CMAsupportsforthemaximumnumberofcablessupportedbysystem
•Thenumbersinthismatrixrepresentthenumberandtypesofexternalcablesrequiredtobe
supported by the CMA solution.
•Thismatrixisbuiltonthepracticalworstcasecongurationineachplatformbasedonprior
andprojectedtakerates.Notethatothercombinationsofadaptersandassociatedcablesexist,
but are assumed to fall within these guidelines from the standpoint of bend radius and
flexibility, cable bundling, cable volume, etc.
•PCINICcablesareassumedtobeEthernet.
•KVMcabledonglemaybeusedformouse/keyboard/video.
CABLE TYPE NUMBER OF CABLES
Mouse – USB 1
Keyboard – USB 1
Video – VGA 1
Power Cords 2
LOMs – Ethernet 1
PCI NICs 1
Total 8
 previous next