Filter
Top Products
56 Using Your Projector
WIRELESS / NETWORK
The Wireless / Network menu allows you to configure the network connection
settings.
DHCP ADDRESS—If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select DHCP
On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use
to select the number of IP Address, Subnet Mask, and Gateway. Key in
Enter to confirm each number and then use to set the next item.
IP A
DDRESS—Automatically or manually assigns the IP address to the projector
connected to the network.
S
UBNET MASK—Configure the Subnet Mask of the network connection.
G
ATEWAY—Check the Gateway address with your network/system administrator if
you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator
if you configure it manually.
S
TORE—Press to save the changes made in network configuration settings.
NOTE:
1 Use and button to select IP Address, Subnet Mask, Gateway, DNS
and Store.
2 Press the button to enter IP Address, Subnet Mask, Gateway or DNS to
set the value. (The selected option is highlighted in yellow)
a Use and button to select the option.
b Use and button to set the value.
c After the setup is complete, press the button to exit.