Filter
Top Products
26 Hard Drive
5
Lift the connector latch and pull the pull-tab to disconnect the hard-drive
cable from the system-board connector.
6
Slide the hard-drive assembly away from the bracket on the palm-rest
assembly.
7
Lift the hard-drive assembly out of the palm-rest assembly.
CAUTION: When the hard drive is not in the computer, store it in protective
antistatic packaging (see "Protecting Against Electrostatic Discharge" in the
safety instructions that shipped with your computer).
8
Remove the four screws that secure the hard-drive bracket to the hard
drive.
9
Lift the hard-drive bracket off the hard drive.
1 bracket 2 hard-drive assembly
3 screws (3) 4 hard-drive cable connector
3
4
2
1
book.book Page 26 Thursday, May 3, 2012 3:09 PM