Filter
Top Products
64 Speakers
Replacing the Speakers
1
Follow the instructions in "Before You Begin" on page 7.
2
Place the speakers on the palm-rest assembly and route the speakers cable
through the routing guides.
3
Replace the two screws (one on each side) that secure the speakers to the
palm-rest assembly.
4
Route the antenna cables through the routing guides.
5
Replace the system board (see "Replacing the System Board" on page 48).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 speakers (2) 2 screws (2)
3 speakers cable
2
1
3
book.book Page 64 Thursday, May 3, 2012 3:09 PM