Filter
Top Products
Optical Drive 33
Replacing the Optical Drive
1
Follow the instructions in "Before You Begin" on page 7.
2
Place the optical-drive bracket in position.
3
Replace the two screws that secure the optical-drive bracket to the optical
drive.
4
Slide the optical-drive assembly into the bracket and tabs on the palm-rest
assembly.
5
Replace the screw that secures the optical-drive assembly to the palm-rest
assembly.
6
Replace the battery (see "Replacing the Battery" on page 16).
7
Replace the base cover (see "Replacing the Base Cover" on page 12).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 screws
(
2
)
2 optical-drive bracket
3 optical drive
2
3
1
book.book Page 33 Thursday, May 3, 2012 3:09 PM