Dell XPS 8700 Personal Computer User Manual


 
After Working Inside Your Computer | 11
After Working Inside Your Computer
After you complete the replacement procedures, ensure the following:
Replace all screws and ensure that no stray screws remain inside your computer.
Place the computer in an upright position.
Connect any external devices, cables, cards, and any other part(s) you removed
before working on your computer.
Connect your computer and all attached devices to their electrical outlets.
CAUTION: Before turning on your computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may damage
your computer.
OM_Book.book Page 11 Tuesday, April 30, 2013 6:07 PM