Filter
Top Products
Replacing the Power Button Module | 59
Replacing the Power Button Module
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align and push the power button module tabs into the slots on the top panel.
2 Connect the power button module cable from the system board connector
F_PANEL. See "System-Board Components" on page 13.
Postrequisites
1 Replace the top cover. See "Replacing the Top Cover" on page 48.
2 Replace the front bezel. See "Replacing the Front Bezel" on page 23.
3 Replace the computer cover. See "Replacing the Computer Cover" on page 16.
OM_Book.book Page 59 Tuesday, April 30, 2013 6:07 PM