Filter
Top Products
Removing the Graphics Card | 27
Procedure
1 Remove the screw that secures the card-retention bracket to the chassis.
2 Lift the card-retention bracket and set it aside in a secure location.
NOTE: Your graphics card may have power-cable connectors.
3 Press the releasing clips on the power-cable connectors and disconnect the power
cable from the graphics card, if applicable.
4 Locate the graphics card (PCI-Express x16 card) on the system board.
See "System-Board Components" on page 13.
NOTE: The appearence of the securing tab may be different on your
computer.
1power cable 2screw
3 card-retention bracket
3
2
1
OM_Book.book Page 27 Tuesday, April 30, 2013 6:07 PM