Dell XPS 8700 Personal Computer User Manual


 
Replacing the Top I/O Panel | 53
Replacing the Top I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the top I/O panel with the screw holes on the top panel.
2 Replace the screws that secure the top I/O panel to the top panel.
3 Connect the top I/O panel cables to the system board connectors, F_USB3 and
F_AUDIO1. See "System-Board Components" on page 13.
Postrequisites
1 Replace the top cover. See "Replacing the Top Cover" on page 48.
2 Replace the front bezel. See "Replacing the Front Bezel" on page 23.
3 Replace the computer cover. See "Replacing the Computer Cover" on page 16.
OM_Book.book Page 53 Tuesday, April 30, 2013 6:07 PM