Filter
Top Products
56 | Replacing the Front USB Panel
Replacing the Front USB Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align and slide the front USB panel clamps into the front USB panel clamp slot.
2 Replace the screw that secures the front USB panel to the front panel.
3 Connect the front USB panel cables to the system board connector F_USB2. See
"System-Board Components" on page 13.
Postrequisites
1 Replace the front bezel. See "Replacing the Front Bezel" on page 23.
2 Replace the computer cover. See "Replacing the Computer Cover" on page 16.
OM_Book.book Page 56 Tuesday, April 30, 2013 6:07 PM