Denso BHT-202B-CE/202BW-CE Barcode Reader User Manual


 
v
Handling the battery cartridge
Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could
cause battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury.
Do not carry or store the battery cartridge together with metallic ball-point pens, necklaces,
coins, hairpins, etc.
Doing so could short-circuit the terminal pins, causing the batteries to rupture or the battery
fluid to leak, resulting in a fire or bodily injury.
Avoid dropping the battery cartridge or letting it undergo any shock or impact.
Doing so could cause the batteries to break, generate heat, rupture or burn.
Never charge the rechargeable battery cartridge where any inflammable gases may be
emitted; doing so could cause fire.
Only use the dedicated charger (CU-200, CH-201) for charging the rechargeable battery
cartridge.
Using a different type of charger could cause battery-rupture or leakage of battery fluid and
result in a fire, bodily injury, or serious damage to property.
Handling the BHT
The BHT uses a laser light for indicating the scanning range. The intensity of the laser light
might be too low to inflict bodily injury. However, do not look into the laser beam or view
directly with optical instruments.
The BHT complies with IEC 60825-1:1993+A2:2001.
In accordance with Clause 8 and 9, IEC 60825-1, the following information is provided to the
user:
Caution - Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Do not look into the light source through the reading window or point the light source
towards the eyes.
The light emitted through the reading window is harmful to the eyes.
Do not poke at the eyes with the stylus that comes with the BHT.
For USA and Canada
LASER RADIATION
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 2M LASER PRODUCT
For European Union