Filter
Top Products
103
Configure Digi devices
1 Assign a static IP address to the Ethernet port.Note that the default address for the
Ethernet port is 192.168.1.1. The default gateway may change to an address such as
10.6.6.6, which is the mobile service provider’s default gateway.
2 Using a web browser, open the web interface for the Digi device using the IP
address you assigned; for example, 172.17.1.1.
3 From the main menu, go to Configuration > Network > Virtual Private Network
(VPN) Settings. There are two groups of VPN settings:
– VPN Internet Key Exchange (IKE) Settings: These settings define the
identity, general security, and Internet Key Exchange security settings for the
VPN connection.
– VPN Policy Settings: These settings define the VPN tunnels and their security
settings.