Filter
Top Products
Configuration through the web interface
148
Current Image: Displays a snapshot of the current camera image. Clicking on
the image brings up a new window with the full size image (as configured
above).
If No Camera Available is displayed, either the camera is disabled (see
above), no camera is attached to the device, or some other problem is causing
the camera to not work correctly.
This current snapshot can be accessed by any web browser directly by using the
URL:
http://device-ip/FS/dev/camera/0
Advanced Settings: All the settings from Automatic Gain Control on
are advanced camera settings. It is recommended to leave these
camera settings to defaults. They can be modified for specific needs
by advanced users, but do not need to be modified by most users.
Camera operation
Once the camera is connected and configured, the current snapshot image from the camera
is available directly from the device at the following URL:
http://device-ip/FS/dev/camera/0
Video from the camera is available by streaming the camera data to a TCP server
application, a configured by the Send Images to TCP Server configuration settings.